The Olivia 2082 measures 212 cm across with 198 cm of sitting space and a 65 cm seat depth. The cover is a separate layer — cushions out first, then the cover, leaving the beech and plywood frame bare. Upholstery is 100% cotton at 630 gsm — the heaviest cotton in our range — over HR foam and a down blend. It is the most container-efficient sofa we make: 52 pieces per 40'HQ.
| Overall | 212 x 98 x 82 cm |
| Sitting Space | 198 x 62 cm |
| Seat Height | 46 cm |
| Seat Depth | 65 cm |
| Arm Height | 64 cm |
| Arm Width | 8 cm |
| Net Weight | 63 kg |
Cotton sits in the middle of our four qualities on two different axes, and both matter when a cover is specified.
| Fabric | Roll width | Weight | Martindale |
|---|---|---|---|
| 100% linen | 138 cm | 450 gsm | 40,000 cycles |
| 100% cotton | 140 cm | 630 gsm | 35,000 cycles |
| 50% linen / 50% cotton | 138 cm | 450 gsm | 30,000 cycles |
| 100% hemp | 140 cm | 650 gsm | 40,000 cycles |
At 630 gsm, cotton is 180 gsm heavier than linen and only 20 gsm below hemp — you feel that in the hand before you feel anything else. On abrasion it is the other way round: 35,000 Martindale cycles is 5,000 fewer than linen and hemp, and 5,000 more than the 50/50 blend. Cotton is the cover to choose when softness and colour retention matter more than abrasion resistance. It is not the most abrasion-resistant quality we stock.
35,000 cycles is a strong domestic cover: above the 30,000 of our 50/50 blend, below the 40,000 of linen and hemp, which is where most residential orders want to be.
For contract and hospitality projects the answer is not a different sofa. The fabric is independent of the model. The same 2082 frame can be covered in hemp or linen at 40,000 cycles — same dimensions, same packing, same pieces per container. Only the fabric line on the quotation changes.
We would rather write that down than claim cotton is the most durable thing we sell. It is the softest and the heaviest of the four. If a project needs abrasion, move the cover, not the frame.
212 cm overall with 198 cm of sitting space gives three seats of roughly 66 cm each. Seat depth is 65 cm, deeper than most of our three-seat sofas — the range runs from 60 to 70 cm. A 46 cm seat height sits in the middle of our sofa range (44–48 cm), so the 2082 reads as a relaxed sofa rather than a formal one.
The 8 cm arm is part of that: a slim arm gives back seat width on the same overall footprint, which is how the 2082 still seats three at 212 cm. Deeper seats suit lounging; if your market sells a more upright sofa, the 2252 and the 2586 are 60 cm deep.
A 20'GP takes 28 pieces of the 2082. A 40'HQ takes 52 — more than any other sofa in the range, where the next highest is 50 and our newest sofa, the 2583, takes 38.
Freight is charged per container, not per piece. At 52 pieces against 38, for the same container cost, per-unit freight on the 2082 is about 27% lower than on the 2583. For a buyer filling a first container with a volume seller rather than a statement piece, this is the model the arithmetic points to.
Because the model is built on our own existing fabric qualities, a single piece can be ordered for testing, and the 2082 can share a container with chairs, beds and other sofas — see mixed container and LCL loading.
The frame is beech wood with plywood panels, and the seat platform is built for sinuous spring or eight-way hand-tied support depending on what the order specifies. Webbing is only used on small items such as ottomans, stools and pet beds, not on a three-seat sofa.
Every order passes five inspection categories covering 46 check points, and 100% of production goes through broken needle detection at 0.8 mm sensitivity — the inspection detail is on our quality page, and the verified figures, including the 0.8 mm setting, are on our facts page.
Fabric, fill and frame changes all go through the same programme — see how OEM/ODM runs.
At 35,000 Martindale cycles it is a strong domestic cover, but linen and hemp reach 40,000. For contract use, specify hemp or linen on the same frame — the packing and the pieces per container do not change.
None on our existing models and existing fabrics. A single piece can be ordered for quality testing.
28 per 20'GP, 52 per 40'HQ.
OEM and ODM welcome. Tell us your target market, quantity and fabric preference — we will come back with pricing, lead time and packing details.
Send an inquiry See our OEM/ODM process