The Grace 2633 is a 215 × 238 cm upholstered bed with a slipcover construction. The cover set lifts off the headboard, footboard and side rails; the frame underneath is pine timber and plywood, with a horizontal flat slat base carried on a vertical centre support. The upholstery is HR foam over polyester fibre. Photographed in 630 gsm cotton, the 2633 ships 42 beds to a 40'HQ in two cartons each. It belongs with the 2583 Rachel and the 2587 Cloud.
| Overall | 215 x 238 x 85 cm |
| Mattress Area | 195 x 200 cm |
| Slat Height | 25 cm |
| Side-rail Height | 30 cm |
| Foot-board Height | 30 cm |
| Leg Height | 2.5 cm |
| Net Weight | 52 kg |
The platform is a horizontal flat slat run, not a sprung base, with a vertical centre support running front to back.
That centre rail is the part buyers should look at. A 200 cm mattress area is a long unsupported span, so the slat run is carried at mid-span rather than only at the two side rails. Flat slats also mean the mattress sits on a continuous plane instead of on curved springs, which is the base most foam and pocket-spring mattresses are specified for.
The slats sit 25 cm off the floor. Add the mattress depth to get the sleeping height — with a 20 cm mattress the bed is low, so this model suits a modern, low-profile bedroom rather than a deep traditional bed.
215 cm wide and 238 cm long overall, against 195 × 200 cm of mattress area: the difference is the side rails (about 10 cm each side) and the headboard and footboard structure front and back.
Side rails and footboard are both 30 cm high, so this is a low-side bed — easy to get in and out of, and it sits under a window line in most European bedrooms. The headboard reaches 85 cm overall, which is a mid-height headboard: it clears a standard mattress and still leaves wall space above.
Four qualities are stocked, all documented on our fabrics page:
| Fabric | Roll width | Weight | Martindale | Pilling |
|---|---|---|---|---|
| 100% linen | 138 cm | 450 gsm | 40,000 cycles | Grade 4.0 |
| 100% cotton | 140 cm | 630 gsm | 35,000 cycles | Grade 4.0 |
| 50% linen / 50% cotton | 138 cm | 450 gsm | 30,000 cycles | Grade 4.0 |
| 100% hemp | 140 cm | 650 gsm | 40,000 cycles | Grade 4.0 |
The Grace is photographed in the cotton quality: 140 cm roll, 630 gsm, 35,000 Martindale cycles, Grade 4.0 pilling. That is the heaviest of the four and the softest hand, which is why it reads as an upholstered bed rather than a platform bed. Linen and hemp reach 40,000 cycles and are the choice where abrasion resistance matters more than softness.
Flammability and lead content are tracked per fabric quality. Fabric 2113 is tested to TB117, SOR/2016-194, CPSC and SOR/2016-193. Verified company facts are on our facts page.
The bed ships in two cartons, not one:
Total gross weight is 88 kg against 52 kg net, so 36 kg of the shipment is packaging and protection.
A 20'GP takes 18 beds. A 40'HQ takes 42. Because each bed is two cartons, a full 40'HQ of Grace is 84 cartons — worth planning for on the receiving side: two different carton footprints, stacked separately, and a 228 cm long carton that needs a clear aisle.
The model can share a container with sofas, chairs and other beds; mixed container and LCL loading is how most first orders ship.
Pine and plywood for the frame, flat slats with a centre support, HR foam over polyester fibre on all three upholstered faces. Every order passes five inspection categories covering 46 check points, with 100% broken needle detection before packing — the detail is on our quality page.
Beds follow the same sample-then-bulk path; the steps are listed here.
The cover set is removable. All four qualities are machine washable at 40 °C or below, with 30 °C recommended; shrinkage is no more than 3% warp and 3% weft, and dry cleaning is optional. Flame retardancy is tested on the fabric as supplied: fabric 2113 no longer meets TB117 after 12 machine washes, so specify a flame-retardant fabric if your market or contract requires it.
Two. 195 × 20 × 90 cm and 228 × 40 × 50 cm, 88 kg gross in total.
195 × 200 cm of mattress area.
No minimum on our existing models and existing fabrics. A single piece can be ordered for quality testing.
OEM and ODM welcome. Tell us your target market, quantity and fabric preference — we will come back with pricing, lead time and packing details.
Send an inquiry See our OEM/ODM process